Using Simulink |

Display an X-Y plot of signals using a MATLAB figure window.

**Library**

**Description**

The XY Graph block displays an X-Y plot of its inputs in a MATLAB figure window.

The block has two scalar inputs. The block plots data in the first input (the *x* direction) against data in the second input (the *y* direction). This block is useful for examining limit cycles and other two-state data. Data outside the specified range is not displayed.

Simulink opens a figure window for each XY Graph block in the model at the start of the simulation.

For a demo that illustrates the use of the XY Graph block, enter `lorenzs`

in the command window.

**Data Type Support**

An XY Graph block accepts real signals of type `double`

.

**Parameters and Dialog Box**

**x-min**- The minimum x-axis value. The default is
`-1`

. **x-max**- The maximum x-axis value. The default is
`1`

. **y-min**- The minimum y-axis value. The default is
`-1`

. **y-max**- The maximum y-axis value. The default is
`1`

. **Sample time**- The time interval between samples. The default is
`-1`

, which means that the sample time is determined by the driving block.

**Characteristics**

Sample Time |
Inherited from driving block |

States |
0 |

Width | Zero-Order Hold |